San Diego County
TAB & Mechanical Acceptance Testing
- Air Balancing
- Hydronic Balancing
- Mechanical Acceptance Testing
NCI Certified
TAB Professional
RSES Certified
Title 24 MAT Experts
Serving All of
San Diego County
Certified Reports
Same-Day Service
Our San Diego County Services
Air Balancing
Hydronic Balancing
Commercial chilled-water and hot-water balancing for San Diego County projects uses field measurements to compare system flow and accessible adjustable components with the project design.
Mechanical Acceptance Testing
San Diego County Mechanical Acceptance Testing for commercial HVAC systems includes the applicable Energy Code procedures and NRCA documentation identified by the project’s compliance documents.
Air Balancing Services in San Diego County
HVAC System Air Balancing
For San Diego County HVAC systems, we measure and adjust commercial supply, return, outside-air, and exhaust airflow toward the values established by the project design.
Restaurant Hood Certification
For San Diego County restaurant projects, kitchen exhaust, makeup air, transfer air, and surrounding HVAC are measured together to document how the complete ventilation system performs.
Fume Hood Testing
For San Diego County fume-hood projects, we measure face velocity and airflow direction and document the operating conditions present during the test.
Air Balance Reports
Hydronic Balancing Services in San Diego County
Chilled Water Systems
For San Diego County chilled-water systems, we measure and adjust commercial flow through coils, equipment, and system branches toward the scheduled design values.
Hot Water Systems
For San Diego County hot-water systems, we verify flow through heating coils and branches while adjusting accessible balancing devices within the confirmed scope.
Hydronic TAB Reports
Title 24 Mechanical Acceptance Testing in San Diego County, CA
Certificates of Acceptance Testing for San Diego County Projects
For San Diego County projects, the required mechanical acceptance scope depends on the installed equipment, project compliance documents, code cycle, and Vortex’s current technician and employer certifications. It may include the following NRCA-MCH procedures:
- NRCA-MCH-02-A Outdoor Air Acceptance
- NRCA-MCH-03-A HVAC and Heat Pumps – Constant Volume Single Zone HVAC
- NRCA-MCH-04-A Duct Leakage
- NRCA-MCH-05-A Economizer, Dedicated Outdoor Air System (DOAS), Heat Recovery Ventilator (HRV), and Energy Recovery Ventilator (ERV)
- NRCA-MCH-06-A Demand Control Ventilation
- NRCA-MCH-07-A Supply Fan Variable Flow Controls
- NRCA-MCH-08-A Valve Leakage Test
- NRCA-MCH-09-A Water Temperature Reset
- NRCA-MCH-10-A Hydronic System Variable Flow Controls
- NRCA-MCH-11-A Automatic Demand Shed Control
- NRCA-MCH-12-A Fault Detection and Diagnostics (FDD) – Packaged Units
- NRCA-MCH-13-A Air Handling Unit (AHU) and Zone Terminal Fault Detection and Diagnostics (FDD)
- NRCA-MCH-14-A Distributed Energy Storage Direct Expansion Air Conditioning (DX AC) Systems
- NRCA-MCH-15-A Thermal Energy Storage
- NRCA-MCH-16-A Supply Air Temperature Reset Controls
- NRCA-MCH-17-A Condenser Water Temperature Reset Controls
- NRCA-MCH-18-A Energy Management Control System (EMCS) Acceptance
- NRCA-MCH-19-A Occupied Standby
San Diego County FAQ
What Is the Difference Between Mechanical Acceptance Testing and a Certificate of Acceptance in San Diego County?
For San Diego County projects, Mechanical Acceptance Testing is the onsite work. The technician performs the required visual inspections and functional tests on the HVAC equipment or controls identified by the project’s Energy Code documentation.
The Certificate of Acceptance is the NRCA form used to record those results. In simple terms, the acceptance test is the procedure performed onsite, while the certificate is the compliance document completed from that work.
For current nonresidential mechanical forms, the California Energy Commission states that NRCA documentation is used to demonstrate compliance with Energy Code acceptance-testing requirements.
Why Is Testing and Balancing Required in San Diego County?
Cities We Provide Air Balancing In Throughout San Diego County
Vortex provides commercial air balancing throughout San Diego County, including every incorporated city listed below:
- Carlsbad
- Chula Vista
- Coronado
- Del Mar
- El Cajon
- Encinitas
- Escondido
- Imperial Beach
- La Mesa
- Lemon Grove
- National City
- Oceanside
- Poway
- San Diego
- San Marcos
- Santee
- Solana Beach
- Vista
Is Mechanical Acceptance Testing Included in My San Diego County TAB Service?
Who Can Perform Mechanical Acceptance Testing in San Diego County?
For a San Diego County project, the required qualification depends on the applicable Energy Code requirements and acceptance procedure.
For the 2025 Energy Code, the California Energy Commission states that mechanical NRCA Certificates of Acceptance must be completed by a field technician or a Certified Acceptance Test Technician through an approved ATTCP provider, then submitted to the inspector. The CEC currently lists CSPTC, NEMIC/TABB, and RSES as approved mechanical-system ATTCP providers.
Vortex performs only the mechanical acceptance procedures covered by the technician and employer qualifications required for the applicable project and code cycle.
Who Can Perform TAB in San Diego County?
Commercial TAB in San Diego County should be performed by personnel qualified to test, adjust, and document the systems included in the project.
The required credential is project-specific. Mechanical plans, specifications, engineer notes, or the reviewing agency may identify recognized procedures or certifications such as TABB, NEBB, AABC, NCI, or another accepted qualification.
Vortex uses NCI-certified TAB technicians and calibrated testing instruments, while the final acceptance of any certification requirement remains subject to the project documents and authority having jurisdiction.
Can Vortex Air Balance Co. Perform Both TAB & MAT Services Together in San Diego County?
Yes. Vortex can perform both TAB and Mechanical Acceptance Testing for a San Diego County project when both services are included in the confirmed scope.
Coordinating TAB and Mechanical Acceptance Testing through Vortex can reduce scheduling handoffs and keep airflow, hydronic results, functional acceptance testing, and required documentation organized through the same testing team.
The exact work still depends on the installed equipment, mechanical plans, Energy Code compliance documents, and acceptance procedures required for the project.
CONTACT US