Picture of the golden gate bridge in San Francisco. Vortex Air Balance Co. provides certified TAB and mechanical acceptance testing in the Bay Area.

San Francisco
TAB & Mechanical Acceptance Testing

Vortex Air Balance Co. provides commercial TAB and Title 24 NRCA Mechanical Acceptance Testing throughout San Francisco.

NCI Certified

TAB Professional

RSES Certified

Title 24 MAT Experts

Serving All of

The Bay Area

Certified Reports

Same-Day Service

Our San Francisco Services

San Francisco services include commercial TAB and Mechanical Acceptance Testing for system verification and project closeout.

Air Balancing

San Francisco TAB can include field measurement and adjustment of commercial air systems when airflow balancing is part of the confirmed project scope.

Hydronic Balancing

Hydronic TAB may include chilled-water or hot-water flow measurement and accessible balancing adjustments where required by the San Francisco project design.

Mechanical Acceptance Testing

San Francisco Mechanical Acceptance Testing verifies applicable commercial HVAC equipment and controls through required Title 24 procedures and NRCA documentation.

TAB Services in San Francisco

HVAC System Air Balancing

Airflow balancing for commercial heating and cooling HVAC systems

Restaurant Hood Certification

Air balancing and certification for commercial restaurant hood systems

Fume Hood Testing

Airflow testing and balancing for commercial laboratory fume hoods

Air Balance Reports

San Francisco TAB reports document the systems tested, design values, field measurements, adjustments, and relevant project conditions.

Hydronic TAB in San Francisco

Chilled Water Systems

Hydronic balancing for commercial chilled-water HVAC systems

Hot Water Systems

Hydronic balancing for commercial hot-water heating systems

Hydronic TAB Reports

San Francisco hydronic TAB reports document tested systems, design flow, measured results, settings, and relevant field observations.

Mechanical Acceptance Testing in San Francisco

San Francisco Mechanical Acceptance Testing applies when project compliance documents identify required procedures. Vortex documents results for the tested systems based on the confirmed scope and applicable qualifications.

Testing and Closeout Support

For San Francisco projects, required procedures depend on installed equipment, compliance documents, the applicable code cycle, confirmed scope, and current technician and employer qualifications.

  • NRCA-MCH-02-A Outdoor Air Acceptance
  • NRCA-MCH-03-A HVAC and Heat Pumps – Constant Volume Single Zone HVAC
  • NRCA-MCH-04-A Duct Leakage
  • NRCA-MCH-05-A Economizer, Dedicated Outdoor Air System (DOAS), Heat Recovery Ventilator (HRV), and Energy Recovery Ventilator (ERV)
  • NRCA-MCH-06-A Demand Control Ventilation
  • NRCA-MCH-07-A Supply Fan Variable Flow Controls
  • NRCA-MCH-08-A Valve Leakage Test
  • NRCA-MCH-09-A Water Temperature Reset
  • NRCA-MCH-10-A Hydronic System Variable Flow Controls
  • NRCA-MCH-11-A Automatic Demand Shed Control
  • NRCA-MCH-12-A Fault Detection and Diagnostics (FDD) – Packaged Units
  • NRCA-MCH-13-A Air Handling Unit (AHU) and Zone Terminal Fault Detection and Diagnostics (FDD)
  • NRCA-MCH-14-A Distributed Energy Storage Direct Expansion Air Conditioning (DX AC) Systems
  • NRCA-MCH-15-A Thermal Energy Storage
  • NRCA-MCH-16-A Supply Air Temperature Reset Controls
  • NRCA-MCH-17-A Condenser Water Temperature Reset Controls
  • NRCA-MCH-18-A Energy Management Control System (EMCS) Acceptance
  • NRCA-MCH-19-A Occupied Standby

San Francisco TAB & MAT FAQ

For San Francisco projects, TAB and Mechanical Acceptance Testing serve different purposes. TAB uses calibrated instruments to measure air and hydronic system performance, compare readings with the approved design, make accessible adjustments, and document final results. Mechanical Acceptance Testing follows specific California Title 24 procedures for applicable equipment and controls and records the required compliance results. Project documents may require TAB, MAT, or both.

A San Francisco project may require TAB through the mechanical plans, specifications, commissioning plan, owner standards, permit conditions, or closeout requirements. TAB provides measured verification of airflow, water flow, pressure, temperature, and equipment performance within the approved scope. The design team and enforcing authority determine the exact requirements, so Vortex reviews the project documents before confirming the work.

No. TAB and Mechanical Acceptance Testing are separate services. TAB measures, adjusts, and reports HVAC system performance against design requirements. Mechanical Acceptance Testing completes the applicable Title 24 functional procedures and compliance documentation. A San Francisco project may require either service or both, and each must be included in the proposal and confirmed scope.

Required nonresidential Mechanical Acceptance Testing in San Francisco must be performed by a certified Mechanical Acceptance Test Technician (ATT) through a California Energy Commission-approved Acceptance Test Technician Certification Provider (ATTCP). The technician must work for a certified Mechanical Acceptance Test Employer (ATE), including when self-employed, and the certification must be current for the applicable procedures. The CEC currently lists CSPTC, NEMIC/TABB, and RSES as approved mechanical ATTCPs.

The approved plans, specifications, owner requirements, and enforcing authority determine who may perform TAB on a San Francisco project. Common recognized TAB certification programs include NEBB, AABC, TABB, and NCI. When a project names a specific certification, the assigned firm and technician must satisfy that requirement and use calibrated instruments and the required reporting procedures. Vortex uses NCI-certified TAB technicians and confirms project-specific qualification requirements before work begins.

Yes. Vortex can coordinate TAB and Mechanical Acceptance Testing for a San Francisco project when both are included in the confirmed scope. TAB is completed and documented for the designated systems, while the certified ATT performs the applicable Title 24 acceptance procedures under a certified ATE. Coordinating both scopes can simplify scheduling and closeout, but each service retains its own requirements, forms, and final documentation.

CONTACT US

Tell us whether your San Francisco project needs TAB, Mechanical Acceptance Testing, or both.