Aerial view of downtown Tulare County, California, where Vortex Air Balance Co. provides TAB and Mechanical Acceptance Testing.

Tulare County
TAB & Mechanical Acceptance Testing

Tulare County testing, adjusting, and balancing (TAB) and Title 24 Mechanical Acceptance Testing are available for the applicable equipment, controls, and NRCA procedures identified in the project compliance documents.

NCI Certified

TAB Professional

RSES Certified

Title 24 MAT Experts

Serving All of

Countywide Service

Certified Reports

Same-Day Service

Our Tulare County Services

Tulare County projects can receive commercial TAB and Mechanical Acceptance Testing.

Air Balancing

Commercial air balancing is available for HVAC systems.

Hydronic Balancing

Hydronic balancing is available for chilled-water and hot-water systems.

Mechanical Acceptance Testing

Title 24 Mechanical Acceptance Testing is available for applicable equipment and controls.

Commercial Air Balancing Services in Tulare County

HVAC System Air Balancing

Tulare County commercial HVAC air balancing is available for project testing and closeout.

Restaurant Hood Certification

Restaurant hood airflow testing and certification are available when required.

Fume Hood Testing

Commercial fume hood airflow testing is available for the confirmed scope.

Air Balance Reports

TAB reports document tested systems, measured results, adjustments, and final values.

Hydronic System Balancing

Chilled Water Systems

Commercial chilled-water system balancing is available.

Hot Water Systems

Commercial hot-water system balancing is available.

Hydronic TAB Reports

Tulare County hydronic TAB reports record measured flow, final settings, and project observations.

Title 24 Mechanical Acceptance Testing in Tulare County

Mechanical Acceptance Testing in Tulare County follows the procedures identified in the project compliance documents.

Testing and Closeout Support

Required procedures depend on the installed equipment, compliance documents, code cycle, confirmed scope, and current technician and employer qualifications.

  • NRCA-MCH-02-A Outdoor Air Acceptance
  • NRCA-MCH-03-A HVAC and Heat Pumps – Constant Volume Single Zone HVAC
  • NRCA-MCH-04-A Duct Leakage
  • NRCA-MCH-05-A Economizer, Dedicated Outdoor Air System (DOAS), Heat Recovery Ventilator (HRV), and Energy Recovery Ventilator (ERV)
  • NRCA-MCH-06-A Demand Control Ventilation
  • NRCA-MCH-07-A Supply Fan Variable Flow Controls
  • NRCA-MCH-08-A Valve Leakage Test
  • NRCA-MCH-09-A Water Temperature Reset
  • NRCA-MCH-10-A Hydronic System Variable Flow Controls
  • NRCA-MCH-11-A Automatic Demand Shed Control
  • NRCA-MCH-12-A Fault Detection and Diagnostics (FDD) – Packaged Units
  • NRCA-MCH-13-A Air Handling Unit (AHU) and Zone Terminal Fault Detection and Diagnostics (FDD)
  • NRCA-MCH-14-A Distributed Energy Storage Direct Expansion Air Conditioning (DX AC) Systems
  • NRCA-MCH-15-A Thermal Energy Storage
  • NRCA-MCH-16-A Supply Air Temperature Reset Controls
  • NRCA-MCH-17-A Condenser Water Temperature Reset Controls
  • NRCA-MCH-18-A Energy Management Control System (EMCS) Acceptance
  • NRCA-MCH-19-A Occupied Standby

Frequently Asked Questions

Testing, adjusting, and balancing (TAB) verifies actual airflow and water-flow performance, then adjusts the system to match the approved design. Mechanical Acceptance Testing evaluates specific equipment, controls, and operating sequences using California Energy Code procedures. Tulare County projects can require one service or both because TAB documents system performance while acceptance testing confirms designated compliance functions.

Before mechanical closeout, the plans, specifications, engineer, commissioning authority, owner, or enforcing agency may require measured HVAC performance. For a Tulare County project, TAB documents whether airflow or hydronic flow reaches design values and records the adjustments made to correct deficiencies. The final report gives the project team field-verified results for review and sign-off.

Air-balancing service is available across Tulare County, including all eight incorporated cities listed below. Projects in unincorporated communities can also be scheduled countywide.

  • Dinuba
  • Exeter
  • Farmersville
  • Lindsay
  • Porterville
  • Tulare
  • Visalia
  • Woodlake

Mechanical Acceptance Testing and TAB are separate scopes with different procedures and documentation. On a Tulare County project, the NRCC compliance documents identify the required NRCA tests, while the proposal identifies whether TAB, acceptance testing, or both are included. Coordinating the schedules can reduce repeat site visits, but one service does not automatically include the other.

The applicable California Energy Code procedure determines the technician and employer qualifications required for Mechanical Acceptance Testing. For Tulare County projects, Vortex assigns RSES-certified technicians only to procedures covered by their current qualifications and the confirmed scope. Completed NRCA forms record the tested equipment, results, and required signatures for project closeout.

Qualification requirements should be confirmed from the approved plans, specifications, engineer, and enforcing agency before work begins. Tulare County TAB projects are completed by NCI-certified technicians using calibrated instruments to measure airflow or water flow and document final results. When NEBB, TABB, AABC, or another credential is specifically required, that requirement must be identified before scheduling.

Coordinating both scopes can streamline closeout on Tulare County projects, provided the systems are operational and the required acceptance procedures are within the confirmed qualifications. TAB is generally completed after equipment, controls, and distribution systems are ready for measurement and adjustment. Acceptance testing then follows the applicable compliance procedures and prerequisites, with scheduling arranged to avoid unnecessary return visits.

CONTACT US

Tell us whether your Tulare County project needs TAB, Mechanical Acceptance Testing, or both.