Los Angeles County
TAB & Mechanical Acceptance Testing
Vortex Air Balance Co. provides commercial testing, adjusting, and balancing (TAB) and Title 24 Mechanical Acceptance Testing (NRCA-MCH) throughout Los Angeles County.
- Air Balancing
- Hydronic Balancing
- Mechanical Acceptance Testing
NCI Certified
TAB Professional
RSES Certified
Title 24 MAT Experts
Serving All of
Los Angeles County
Certified Reports
Same-Day Options
Our Los Angeles County Services
Our team provides the following commercial TAB and Title 24 services in Las Angeles County:
Air Balancing
TAB services for air-moving HVAC systems..
Hydronic Balancing
Water sourced- HVAC system testing, adjusting, and balancing.
Mechanical Acceptance Testing
Title 24 mechanical acceptance testing (MAT) with all project required NRCA-MCH forms.
Air Balancing Services in Los Angeles County
HVAC System Air Balancing
Commercial air balancing services for all air-moving system types.
Restaurant Hood Certification
Exhaust and makeup airflow testing, adjustments, and certified reports for LA health inspections.
Fume Hood Testing
Face-velocity testing and adjustment for commercial fume hoods.
Air Balance Reports
Certified air balance reports for city inspections documenting all tested data.
Hydronic Balancing Services in Los Angeles County
Hydronic TAB Reports
Hydronic TAB reports documenting the equipment tested, design flow, measured results, and balancing settings.
Title 24 Mechanical Acceptance Testing in Los Angeles County, CA
Los Angeles County Mechanical Acceptance Testing applies when a commercial project’s Energy Code compliance documents require specific mechanical acceptance procedures. Vortex performs only the applicable visual inspections and functional tests covered by the confirmed scope and current technician and employer qualifications, then completes the required NRCA documentation for the tested systems.
For the 2025 Energy Code, the California Energy Commission identifies NRCA Certificates of Acceptance as the documents used to demonstrate compliance with acceptance-testing requirements. Mechanical NRCA forms ending in -A must be completed by a Certified Acceptance Test Technician through an approved ATTCP provider.
Reference: California Energy Commission — 2025 Energy Code Compliance Documents.
Mechanical Certificates of Acceptance for Los Angeles County Projects
The Mechanical Acceptance Testing required on a Los Angeles County project depends on the installed equipment, Energy Code compliance documents, applicable code cycle, confirmed testing scope, and Vortex’s current technician and employer certifications. When those requirements apply, the scope may include one or more of the following NRCA-MCH acceptance procedures.
- NRCA-MCH-02-A Outdoor Air Acceptance
- NRCA-MCH-03-A HVAC and Heat Pumps – Constant Volume Single Zone HVAC
- NRCA-MCH-04-A Duct Leakage
- NRCA-MCH-05-A Economizer, Dedicated Outdoor Air System (DOAS), Heat Recovery Ventilator (HRV), and Energy Recovery Ventilator (ERV)
- NRCA-MCH-06-A Demand Control Ventilation
- NRCA-MCH-07-A Supply Fan Variable Flow Controls
- NRCA-MCH-08-A Valve Leakage Test
- NRCA-MCH-09-A Water Temperature Reset
- NRCA-MCH-10-A Hydronic System Variable Flow Controls
- NRCA-MCH-11-A Automatic Demand Shed Control
- NRCA-MCH-12-A Fault Detection and Diagnostics (FDD) – Packaged Units
- NRCA-MCH-13-A Air Handling Unit (AHU) and Zone Terminal Fault Detection and Diagnostics (FDD)
- NRCA-MCH-14-A Distributed Energy Storage Direct Expansion Air Conditioning (DX AC) Systems
- NRCA-MCH-15-A Thermal Energy Storage
- NRCA-MCH-16-A Supply Air Temperature Reset Controls
- NRCA-MCH-17-A Condenser Water Temperature Reset Controls
- NRCA-MCH-18-A Energy Management Control System (EMCS) Acceptance
- NRCA-MCH-19-A Occupied Standby
Los Angeles County FAQ
What Is the Difference Between Mechanical Acceptance Testing and a Certificate of Acceptance?
Mechanical Acceptance Testing in Los Angeles County is the field work: the technician performs the required visual inspections and functional tests on the commercial HVAC equipment or controls identified by the project’s Energy Code documentation.
A Certificate of Acceptance is the NRCA compliance document used to record those Los Angeles County test results. In simple terms, Mechanical Acceptance Testing is the work performed onsite, while the Certificate of Acceptance is the documentation completed from that work.
The California Energy Commission uses NRCA Certificates of Acceptance to demonstrate compliance with applicable Energy Code acceptance-testing requirements.
Reference: California Energy Commission — 2025 Energy Code Compliance Documents.
Why May Testing and Balancing Be Required in Los Angeles County?
Los Angeles County testing, adjusting, and balancing may be required when the applicable building standards, approved mechanical plans, engineer notes, project specifications, permit comments, or reviewing agency call for field verification of commercial HVAC or hydronic performance.
Why test equipment that already turns on? Because a running system can still deliver incorrect airflow, outside air, exhaust, room pressure, or water flow. TAB gives the Los Angeles County project team actual field measurements and an opportunity to adjust accessible components toward the design values before the final condition is documented.
For areas under Los Angeles County Mechanical Code jurisdiction, Title 29 adopts the 2025 California Mechanical Code with County modifications. Incorporated cities may have their own enforcing agencies or local amendments, so the requirements should always be confirmed for the project location.
Reference: Los Angeles County Code, Title 29 — Mechanical Code.
Cities We Provide Air Balancing In Throughout Los Angeles County
Vortex provides commercial air balancing throughout Los Angeles County, including every incorporated city listed below:
- Agoura Hills
- Alhambra
- Arcadia
- Artesia
- Avalon
- Azusa
- Baldwin Park
- Bell
- Bell Gardens
- Bellflower
- Beverly Hills
- Bradbury
- Burbank
- Calabasas
- Carson
- Cerritos
- Claremont
- Commerce
- Compton
- Covina
- Cudahy
- Culver City
- Diamond Bar
- Downey
- Duarte
- El Monte
- El Segundo
- Gardena
- Glendale
- Glendora
- Hawaiian Gardens
- Hawthorne
- Hermosa Beach
- Hidden Hills
- Huntington Park
- Industry
- Inglewood
- Irwindale
- La Cañada Flintridge
- La Habra Heights
- La Mirada
- La Puente
- La Verne
- Lakewood
- Lancaster
- Lawndale
- Lomita
- Long Beach
- Los Angeles
- Lynwood
- Malibu
- Manhattan Beach
- Maywood
- Monrovia
- Montebello
- Monterey Park
- Norwalk
- Palmdale
- Palos Verdes Estates
- Paramount
- Pasadena
- Pico Rivera
- Pomona
- Rancho Palos Verdes
- Redondo Beach
- Rolling Hills
- Rolling Hills Estates
- Rosemead
- San Dimas
- San Fernando
- San Gabriel
- San Marino
- Santa Clarita
- Santa Fe Springs
- Santa Monica
- Sierra Madre
- Signal Hill
- South El Monte
- South Gate
- South Pasadena
- Temple City
- Torrance
- Vernon
- Walnut
- West Covina
- West Hollywood
- Westlake Village
- Whittier
Is Mechanical Acceptance Testing Included in My Los Angeles County TAB Service?
No. Los Angeles County TAB and Mechanical Acceptance Testing are separate scopes even when the same project requires both.
TAB measures and adjusts commercial airflow or hydronic performance against the mechanical design. Mechanical Acceptance Testing follows specific California Energy Code procedures for regulated HVAC equipment and controls and may require separate NRCA Certificates of Acceptance.
When both services are required on a Los Angeles County project, Vortex can coordinate them together when the procedures fall within our confirmed scope and current qualifications.
Who Can Perform Mechanical Acceptance Testing in Los Angeles County?
The qualification for Los Angeles County Mechanical Acceptance Testing depends on the applicable Energy Code, required NRCA form, and project code cycle.
For the 2025 Energy Code, the California Energy Commission states that NRCA mechanical forms ending in -A must be completed by a Certified Acceptance Test Technician through an approved Acceptance Test Technician Certification Provider. The CEC currently identifies California State Pipe Trades Council, NEMIC/TABB, and RSES as approved mechanical ATTCP providers.
Vortex performs only those Los Angeles County Mechanical Acceptance Testing procedures covered by the technician and employer certifications required for the individual project.
Reference: California Energy Commission — Acceptance Test Technician Certification Providers.
Who Can Perform TAB in Los Angeles County?
Los Angeles County commercial TAB should be performed by personnel qualified to measure, adjust, and document the air-side or hydronic systems included in the project.
The required credential is project-specific. Plans, specifications, engineer notes, CALGreen provisions, or the reviewing agency may identify recognized procedures or qualifications through organizations such as TABB, NEBB, AABC, NCI, or another approved organization.
Vortex uses NCI-certified TAB technicians and calibrated testing instruments for Los Angeles County work. Where a particular certification is required by the project or enforcing agency, that qualification should be confirmed before testing begins.
Can Vortex Coordinate TAB and Mechanical Acceptance Testing Together in Los Angeles County?
Yes, when both scopes are required and fall within Vortex’s current qualifications.
Using one testing company for Los Angeles County TAB and applicable Mechanical Acceptance Testing can reduce scheduling handoffs and keep airflow, hydronic results, system adjustments, functional testing, and required documentation organized through one project team.
The exact Los Angeles County scope still depends on the installed equipment, mechanical plans, Energy Code compliance documents, required acceptance procedures, and project schedule.
CONTACT US
Need TAB or Mechanical Acceptance Testing in Los Angeles County? Send us the project information and any available mechanical plans. Our team will review and reach out to you ASAP.